Kino-flo Celeb 200 DMX LED Manuel d'utilisateur télécharger pdf (Page 11)

Celeb 200 DMX

Kelvin Color Temperature

Dimmer Level

Kelvin Color

Temperature

Dimmer

Level

5500K 100%

5000K 75%

4000K 50%

3200K 15%

2700K 0%

DMX Cables

The Celeb 200 DMX xtures use ve-pin XLR male and

female connectors to receive DMX signals from the Dimmer

Board and jumper the xtures in a series. DMX pin-out

wiring follows the USITT DMX512 standard:

Pin 1: Shield

Pin 2: Data –

Pin 3: Date +

Pin 4: Spare –

Pin 5: Spare +

Note: Pin four and ve in the xture are connected internally

as Pin four to four and Pin ve to ve. Connecting Pin

four and ve as the pass-thru allows secondary data to be

passed through other equipment.

Do not use Microphone Cables and other general purpose, two-core cables designed

for audio or signaling use. They are not suitable for DMX512. Problems due to

incorrect cabling may not be immediately apparent. Microphone Cables may appear

to work ne, but systems built with such cables may fail or be prone to random errors.

Cable must comply with EIA-485 (RS485).

Note: The detailed DMX mapping for the Celeb 200 DMX xture can be downloaded

from the Operation Manual posted on www.kinoo.com.

IMPORTANT!

The dimmer board/light console should have its channel set to LINEAR light output

response. (LINEAR response is the default setting on most dimmer boards.)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Pas de commentaire

Kino-flo Celeb 200 DMX LED Manuel d'utilisateur Page 11